| Positioning-control Based on Trapezoidal Velocity Curve for High-precision Basis Weight Control Valve |
| Click here to download the full text |
| Citation of this paper: |
| Hits: 1489 |
| Download times: 1962 |
| Author Name | Affiliation | | Bo Wang1,2 | 1. College of Bioresources Chemical & Materials Engineering of Shaanxi University of Science & Technology, Xi'an, Shaanxi Province, 710021, China
2. Shaanxi Research Institute of Agricultural Products Processing Technology, Xi'an, Shaanxi Province, 710021, China | | Wei Tang1,2,* | 1. College of Bioresources Chemical & Materials Engineering of Shaanxi University of Science & Technology, Xi'an, Shaanxi Province, 710021, China
2. Shaanxi Research Institute of Agricultural Products Processing Technology, Xi'an, Shaanxi Province, 710021, China | | JiXian Dong1,2 | 1. College of Bioresources Chemical & Materials Engineering of Shaanxi University of Science & Technology, Xi'an, Shaanxi Province, 710021, China
2. Shaanxi Research Institute of Agricultural Products Processing Technology, Xi'an, Shaanxi Province, 710021, China | | Feng Wang3 | 3. Zhejiang Linuo Flow Control Technology Co., Ltd., Rui'an, Zhejiang Province, 325200, China |
|
| Fund Project:This work is supported by the International S&T Cooperation Program of China (Grant No.2010DFB43660), National Natural Science Foundation of China (Grant No.51375286), and Scientific Research Program Funded by Shaanxi Provincial Education Department (Program No.16JF005). |
| |
| Abstract:Traditionally, basis weight control valve is driven by a constant frequency pulse signal. Therefore, it is difficult for the valve to match the control precision of basis weight. Dynamic simulation research using Matlab/Simulink indicates that there is much more overshoot and fluctuating during the valve-positioning process. In order to improve the valve-positioning precision, the control method of trapezoidal velocity curve was studied. The simulation result showed that the positioning steady-state error was less than 0.0056%, whereas the peak error was less than 0.016% by using trapezoidal velocity curve at 10 positioning steps. A valve-positioning precision experimental device for the stepper motor of basis weight control valve was developed. The experiment results showed that the error ratio of 1/10000 positioning steps was 4% by using trapezoidal velocity curve. Furthermore, the error ratio of 10/10000 positioning steps was 0.5%. It proved that the valve-positioning precision of trapezoidal velocity curve was much higher than that of the constant frequency pulse signal control strategy. The new control method of trapezoidal velocity curve can satisfy the precision requirement of 10000 steps. |
| keywords:high-precision basis weight control valve precision positioning control trapezoidal velocity curve Matlab/Simulink simulation |
| HTML View Full Text View/Add Comment Download reader |
|
|
|